This receiver touts a rather artistic grill for a wooden tombstone radio.  The inner portion is curvy and flamboyant which is finished in black lacquer.  The two outer edges are straight and conservative, opposite of the inner portion, and are finished in the same oak finish that covers the rest of the cabinet.  Another unique aspect of this radio are the four brass colored inserts.  The inserts are actually an aluminum or steel metal but the amber lacquer finish gives them a golden color.  I purchased this receiver from an Ebay auction in 2001.

Tube Line Up:
78...R.F. Amplifier
6A7...1st. Detector / Oscillator
78...I.F. Amplifier
6B7...2nd. Detector / AVC
42...Audio Output
80...Rectifier

Measurements:
Height...18.25 inches
Width...12.75 inches
Depth...9.5 inches

Frequency Range:
BC (Red)...550 Khz - 1600 Khz
SW (Green / Red)...6 Mhz - 15 Mhz
I.F. Frequency...456 khz

Power Source:
AC...110 Volts

    The schematic for this radio can be found at the Nostalgia Air web site by clicking on the links below.

Schematic and information